| How does it work? | The JetCare® System Anti-Barking Collar contains a microphone. Each time your dog barks, the collar emits a cold spray directed onto his neck. This stimulus, the effect of surprise, is enough to interrupt your dog’s undesirable behavior. In the space of a few days, your dog will learn to remain calm when wearing the collar. |
| Features: | -Works systematically and autonomously -Painless and harmless to the animal’s sense of smell -Detects barking with a microphone |
| Product Advantages: | -High Reservoir capacity: Enough for more than 54 sprays -Available in TWO sizes: -JetCare® Anti-barking for dogs---for dogs weighing over 8kg -Mini JetCare® Anti-barking---suitable for any sized dog (best used for dogs under 8kg/17lbs) |
| Directive: | Do NOT leave collar around dog’s neck for more than 6-8 HOURS daily. Do NOT use on puppies under 8 MONTHS |
| TOPIC | n° | QUESTIONS | ANSWERS |
| REFILL TANK | 1 | How do I refill my unit? | 1. Place the unit upside down on a flat surface (filling valve facing you) 2. Insert the canister tip into the filling valve whilst holding the device 3. Press canister firmly downwards until the tank is full 4. Check spray level (through white transparent tank) |
| 2 | I can't refill my unit: the filling valve is leaking! | The tank is full of air - To take the air out of the tank: 1. Insert the canister tip into the filling valve whilst holidng the device 2. Softly Press the canister 3. Take out the air and then press completely to refill (see point n°1) |
|
| BATTERY : -Change Battery -Battery Level -Type of Battery |
3 | How do I insert or change the battery? | 1. Unscrew the battery cover using the token. 2. Slide the battery into the slot “-“ negative end first / the positive side must be against the battery cover 3. Screw the cover back |
| 4 | How do I check the battery level - How do I check the battery is working? | 1. Insert the battery in the device (Check point n°3) 2. Do not refill your device 3. Blow into the microphone hole: you should hear a release noise |
|
| 5 | I have changed the battery but it still does not work | 1. Check you have inserted the battery correctly (point n°3) 2. Be sure to only use a 2CR1/3N Battery - 6 Volt Lithium (SANYO, DURACELL ...) 3. Check you have screwed the battery cover on correctly by using the token 4. Check you have refilled your device (point n°1 and n°2) |
|
| TURN ON | 6 | I can't turn my device on | 1. Check you have inserted the battery correctly (Point n°3) 2. Check you are using the correct battery (Battery 2CR1/3N - 6 Volt Lithium (SANYO, DURACELL ...) (Point n°4 + n°5) 3. Check you have screwed the battery cover on correctly by using the token 4. Check you have well refilled your device (point n°) 5. Verify your device works by blowing into the microphone hole |